With Monochrome Display

U1000 CAN COMM CIRCUIT





Description
CAN (Controller Area Network) is a serial communication line for real time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with two communication lines (CAN-H line, CAN-L line) allowing a high rate of information transmission with less wiring.
Each control unit transmits/receives data but selectively reads required data only.
CAN Communication Signal Chart. How To Use CAN Communication Signal Chart.




DTC Logic

DTC DETECTION LOGIC









Diagnosis Procedure
1.CHECK WITH SELF-DIAGNOSIS FUNCTION OF CONSULT-III
1. Turn ignition switch ON and wait for 2 or more seconds.
2. Using CONSULT-III, perform "SELF-DIAGNOSIS RESULTS" of HVAC.
Is "CAN COMM CIRCUIT" displayed?
YES - Perform trouble diagnosis for the CAN communication system. Trouble Diagnosis Flow Chart.
NO - Perform the intermittent malfunction diagnosis. Intermittent Incident.