Diagnosis Procedure

TILT SWITCH


Description

ADP steering switch (tilt switch) is equipped to the steering column. The operation signal is input to the automatic drive positioner control unit when the ADP steering switch is operated.




TILT SWITCH


Diagnosis Procedure

Regarding Wiring Diagram information, Automatic Drive Positioner Control Unit.
1. CHECK TILT SWITCH SIGNAL





1. Disconnect ADP steering switch (tilt switch).
2. Check voltage between ADP steering switch harness connector and ground.





Is the inspection result normal?
YES - GO TO 3
NO - GO TO 2
2. CHECK TILT SWITCH CIRCUIT





1. Disconnect automatic drive positioner control unit.
2. Check continuity between automatic drive positioner control unit harness connector and ADP steering switch harness connector.





3. Check continuity between automatic drive positioner control unit harness connector and ground.





Is the inspection result normal?
YES - Replace automatic drive positioner unit. Automatic Drive Positioner Control Unit.
NO - Repair or replace harness.
3. CHECK TILT SWITCH
Component Inspection.
Is the inspection result normal?
YES - GO TO 4
NO - Replace ADP steering switch (tilt switch). Service and Repair.
4. CHECK INTERMITTENT INCIDENT
Intermittent Incident.
- Inspection End.