W/O Climate Controlled Seats

REAR SEAT


Removal and Installation


CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

Seat Cushion Removal





1. Pull the lock lever (1) at the front bottom of the seat cushion forward (one for each side), and pull the seat cushion upward to release the wire (2) from the seat cushion hook. Then pull the seat cushion forward to remove.
2. Remove the seat cushion from the vehicle.

Installation
Installation is in the reverse order of removal.

Seatback Removal
1. Remove the seat cushion.
2. Remove the headrest assemblies.





3. Remove the seatback frame bolts and nut.






4. Disconnect the harness connectors.
5. Lift the seatback to disengage seat hook wires from the hangers.

INSTALLATION
Installation is in the reverse order of removal.



REAR SEAT

Removal and Installation

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

BENCH SEAT CUSHION

Removal





1. Pull the lock lever (1) at the front bottom of the seat cushion forward (one for each side), and pull the seat cushion upward to release the wire (2) from the seat cushion hook. Then pull the seat cushion forward to remove.
2. Remove the seat cushion from the vehicle.

Installation
Installation is in the reverse order of removal.

BENCH SEATBACK

Removal
1. Lock seatbacks in upright position.





2. Remove the lower frame halo anchor bolts and nut.
3. Fold seatbacks forward.





4. Remove latch covers (A).
5. Remove upper frame halo bolts (B).
6. Remove the seatback assembly.

Installation
Installation is in the reverse order of removal.