Courtesy Lamp: Service and Repair

INTERIOR ROOM LAMP


Removal and Installation


FRONT ROOM/MAP LAMP

Removal









1. Release the metal clips and drop front edge of front room/map lamp (1) away from headlining. Slide front room/map lamp forward in vehicle to clear pawls at rear.

2. Disconnect the connectors, then remove map lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement





1. Using a suitable tool (3), remove front room/map lamp lens (2) RH/LH.
2. Pull bulb (1) straight out to remove.

Front room/ map lamp bulb : 12V - 8W


VANITY MIRROR LAMP

Removal
The vanity mirror lamp is replaced as part of the sunvisor assembly. Removal And Installation.

Installation
Installation is in the reverse order of removal.

Bulb Replacement





1. Using a suitable tool (1), remove the vanity mirror lamp lens (2) RH/LH.
2. Pull bulb (3) straight out to remove.

Vanity mirror lamp bulb : 12V - 1.4W


GLOVE BOX LAMP

Removal





1. Remove the lower instrument glove box assembly (1). Removal And Installation.
2. Rotate glove box lamp socket (3) counterclockwise to remove.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove glove box lamp socket (3).
2. Pull bulb (2) straight out to remove.

Glove box lamp bulb : 12V - 3.4W

STEP LAMP

Removal









1. Insert a suitable tool between door finisher (2) and step lamp lens/socket (1) to release the pawls.
2. Disconnect the step lamp connector, then remove step lamp.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove the step lamp lens/socket.
2. Pull the bulb straight out to remove.

Step lamp bulb : 12V - 3.8W


FOOT LAMP

Removal





1. Remove instrument lower cover LH if accessing driver side foot lamp socket, Exploded View. Grasp foot lamp socket, then rotate counterclockwise to release from substrate (1).

NOTE:
Lamp socket is shown from passenger compartment side.

Installation
Installation is in the reverse order of removal.

Bulb Replacement
1. Remove foot lamp socket from substrate.
2. Pull bulb (2) straight out to remove.

Foot lamp bulb : 12V - 3.4W


PERSONAL LAMP

Removal
The personal lamp is replaced as part of the headlining assembly. Removal And Installation.

Installation
Installation is in the reverse order of removal.

Bulb Replacement





1. Using a suitable tool, release the pawls and remove personal lamp lens (3) from the personal lamp (1).
Arrow indicates : Vehicle front

2. Pull bulb (2) straight out to remove.

Personal lamp bulb : 12V - 8W