Wheel Sensor

WHEEL SENSORS


Removal and Installation












CAUTION:
- Be careful not to damage wheel sensor edge and sensor rotor teeth.
- When pulling out the wheel sensor, be careful to turn it as little as possible. Do not pull on the wheel sensor harness.
- Check if foreign objects such as iron fragments are adhered to the pick-up part of the sensor or to the inside of the hole for the wheel sensor, or if a foreign object is caught in the surface of the mating surface for the wheel sensor. Repair as necessary and then install the wheel sensor.

FRONT WHEEL SENSOR

Removal
1. Remove the front wheel and tire. Adjustment.
2. Partially remove front wheel fender protector and reposition out of the way. Removal And Installation.
3. Disconnect the wheel sensor harness connector.
4. Remove the wheel sensor harness from the brackets.
5. Remove the wheel sensor bolt and wheel sensor from the front hub assembly.

Installation
Installation is in the reverse order of removal.

REAR WHEEL SENSOR

Removal
1. Remove the rear wheel and tire. Adjustment.





2. Remove the stabilizer bar clamps and bushings using power tool, and reposition the stabilizer bar out of the way.
3. Disconnect the wheel sensor harness connector.
4. Remove the wheel sensor harness from the brackets.
5. Remove the wheel sensor bolt and wheel sensor from the rear hub assembly.

Installation
Installation is in the reverse order of removal.