Removal And Installation (Battery)

BATTERY


Removal and Installation (Battery)


REMOVAL
1. Loosen battery cable assembly nuts, and disconnect both battery terminals.

CAUTION:
When disconnecting, disconnect the negative terminal first.
2. Remove upper ECM bracket nut and bolt and ECM upper bracket.
3. Remove battery frame nuts and battery frame.
4. Remove battery.

INSTALLATION





Installation is in the reverse order of removal.

Battery cable assembly nut : 5.4 N.m (0.55 kg-m, 48 in-lb)

CAUTION:
When connecting, connect the positive terminal first.
Reset electronic systems as necessary. Programming and Relearning.