Removal and Installation

POWER STEERING OIL PUMP


Removal and Installation


REMOVAL
1. Remove front tire (RH) using power tool. Adjustment.
2. Remove engine side undercover.
3. Remove hood ledge cover (RH).
4. Drain power steering fluid. Draining.
5. Disconnect high pressure piping and suction hose from power steering oil pump. Exploded View.
6. Loosen drive belt. Removal And Installation.
7. Remove drive belt from power steering oil pump pulley.
8. Remove power steering oil pump bolts, and then remove power steering oil pump.

INSTALLATION
Installation is in the reverse order of removal.
- When installing power steering oil pump, install all bolts by hand initially, then tighten bolts to specification.
- Perform the following procedures after installing.
- Check belt tension. Procedures.
- Bleed air from power steering system. Refilling.