Changing

CVT FLUID


Changing


CAUTION:
Replace a O-ring with new ones at the final stage of the operation when installing.
1. Remove drain plug from oil pan.
2. Remove O-ring from drain plug.
3. Install O-ring to drain plug.

CAUTION:
Never reuse O-ring.
4. Install drain plug to oil pan. Exploded View.
5. Fill CVT fluid from CVT fluid charging pipe to the specified level.


CAUTION:
- Use only Genuine NISSAN CVT Fluid NS-2. Never mix with other fluid.
- Using CVT fluid other than Genuine NISSAN CVT Fluid NS-2 will deteriorate in driveability and CVT durability, and may damage the CVT, which is not covered by the warranty.
- When filling CVT fluid, take care not to scatter heat generating parts such as exhaust.
- Sufficiently shake the container of CVT fluid before using.
- Delete CVT fluid deterioration date with CONSULT-III after changing CVT fluid. CONSULT-III Function (Transmission).
6. With the engine warmed up, drive the vehicle in an urban area.

NOTE:
When ambient temperature is 20�C (68�F), it takes about 10 minutes for the CVT fluid to warm up to 50 to 80°C (122 to 176�F).
7. Check CVT fluid level and condition.
8. Repeat steps 1 to 5 if CVT fluid has been contaminated.