Cruise Test

ROAD TEST


Cruise Test

1.CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 1)
1. Drive vehicle for approximately 10 minutes to warm engine oil and CVT fluid up to operating temperature.

CVT fluid operating temperature : 50 - 80�C (122 - 176�F)

2. Park vehicle on flat surface.
3. Move selector lever to "P" position.
4. Start engine.
5. Move selector lever to "D" position.





6. Accelerate vehicle at 2/8 throttle opening and check "Vehicle Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 2.
NO - Symptom Related Diagnostic Procedures. GO TO 2.
2.CHECK VEHICLE SPEED WHEN SHIFTING GEARS (PART 2)
1. Park vehicle on flat surface.
2. Move selector lever to "D" position.





3. Accelerate vehicle at 8/8 throttle opening and check "Vehicle Speed When Shifting Gears".

With CONSULT-III
- Read vehicle speed and engine speed. Vehicle Speed When Shifting Gears.
Is the inspection result normal?
YES - GO TO 3.
NO - Symptom Related Diagnostic Procedures. GO TO 3.
3.CHECK DS MODE FUNCTION
Move to "DS" mode from "D" position.
Does it switch to "DS" mode?
YES - GO TO 4.
NO - Symptom Related Diagnostic Procedures. GO TO 4.
4.CHECK MANUAL MODE FUNCTION
Move to manual mode from "DS" position.
Does it switch to manual mode?
YES - GO TO 5.
NO - Symptom Related Diagnostic Procedures. GO TO 5.
5.CHECK SHIFT UP FUNCTION
During manual mode driving, is upshift from M1 to M2 to M3 to M4 to M5 to M6 performed?

With CONSULT-III
- Read vehicle speed and engine speed. CONSULT-III Function (Transmission).
Is upshifting correctly performed?
YES - GO TO 6.
NO - Symptom Related Diagnostic Procedures. GO TO 6.
6.CHECK SHIFT DOWN FUNCTION
During manual mode driving, is downshift from M6 to M5 to M4 to M3 to M2 to M1 performed?

With CONSULT-III
- Read vehicle speed and engine speed. CONSULT-III Function (Transmission).
Is downshifting correctly performed?
YES - GO TO 7.
NO - Symptom Related Diagnostic Procedures. GO TO 7.
7.CHECK ENGINE BRAKE FUNCTION
Check engine brake.
Does engine braking effectively reduce vehicle speed in "M1" position?
YES - 1. Stop the vehicle.
2. Perform "Self Diagnostic Results" in "TRANSMISSION".
NO - Symptom Related Diagnostic Procedures. Then continue trouble diagnosis.