C1605

TROUBLE DIAGNOSIS FOR SYSTEM


DTC C1605 ANGLE SENSOR


DIAGNOSTIC PROCEDURE
1.PERFORM SELF-DIAGNOSIS

With CONSULT-III
1. Turn ignition switch "ON". (Do not start engine.)
2. Select "SELF-DIAG RESULTS" mode for "EPS" with CONSULT-III.
3. Touch "ERASE".
4. Turn ignition switch "OFF", and wait at least 10 seconds.
5. Start engine.
6. Perform the self-diagnosis again.
Is the "ANGLE SENSOR [C1605]" displayed?
YES - EPS motor rotor position sensor is malfunctioning. Replace steering column assembly. Service and Repair.
NO - INSPECTION END