C1606
TROUBLE DIAGNOSIS FOR SYSTEM
DTC C1606 EPS MOTOR
DIAGNOSTIC PROCEDURE
1.PERFORM SELF-DIAGNOSIS
With CONSULT-III
1. Turn ignition switch "ON". (Do not start engine.)
2. Select "SELF-DIAG RESULTS" mode for "EPS" with CONSULT-III.
3. Touch "ERASE".
4. Turn ignition switch "OFF", and wait at least 10 seconds.
5. Start engine.
6. Perform the self-diagnosis again.
Is the "EPS MOTOR [C1606]" displayed?
YES - EPS motor is malfunctioning. Replace steering column assembly. Service and Repair.
NO - INSPECTION END