Power Window And Door Lock/Unlock Switch RH Power Supply Circuit Inspection

POWER WINDOW SYSTEM


Power Window and Door Lock/Unlock Switch RH Power Supply Circuit Inspection

1.CHECK POWER SUPPLY CIRCUIT





1. Turn ignition switch ON.
2. Check voltage between power window and door lock/unlock switch RH connector D104 terminal 8 and ground.

8 - Ground : Battery voltage

OK or NG
OK - Replace power window and door lock/unlock switch RH. Service and Repair.
NG - GO TO 2.
2.CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH POWER SUPPLY CIRCUIT





1. Turn ignition switch OFF.
2. Disconnect BCM and power window and door lock/unlock switch
RH.
3. Check continuity between BCM connector (A) and power window and door lock/unlock switch RH connector (B).





4. Check continuity between BCM connector (A) and ground.





OK or NG
OK - Check the condition of the harness and the connector.
NG - Repair or replace harness.