Removal and Installation

COOLING FAN


Removal and Installation


WARNING:
Never remove the radiator cap when the engine is hot. Serious burns could occur form high pressure engine coolant escaping from the radiator.

REMOVAL
1. Partially drain engine coolant from radiator. Changing Engine Coolant.

CAUTION:
- Perform this step when engine is cold.
- Do not spill engine coolant on drive belt.
2. Remove front air duct. Service and Repair.
3. Disconnect reservoir tank hose from radiator and cooling fan assembly.
4. Disconnect radiator hose (upper) at radiator side. Component.
5. Disconnect harness connectors from fan motor, and position harness aside.
6. Remove cooling fan assembly.

CAUTION:
Be careful not to damage or scratch the radiator core.

INSTALLATION
Installation is in the reverse order of removal.
- Cooling fans are controlled by ECM. For details, P1217 P1217.

CAUTION:
Be careful not to damage or scratch the radiator core.