Removal and Installation

COOLING FAN


Removal and Installation


REMOVAL
1. Partially drain engine coolant from radiator. Changing Engine Coolant.

CAUTION:
- Perform this step when engine is cold.
- Do not spill engine coolant on drive belt.
2. Remove air duct (inlet). Exploded View.
3. Remove reservoir tank.
4. Disconnect radiator hose (upper) at radiator side. Component.
5. Disconnect harness connectors from fan motor, and move harness to aside.
6. Remove cooling fan assembly.

CAUTION:
Be careful not to damage or scratch the radiator core.

INSTALLATION
Installation is in the reverse order of removal.
- Cooling fans are controlled by ECM. For details, Diagnosis Procedure.

CAUTION:
Be careful not to damage or scratch the radiator core.