C1300

C1300





Description
The brake ECU outputs this DTC malfunctions are found in the circuit inside the computer by self diagnosis.




DTC Logic









Diagnosis Procedure

CAUTION:
When replacing the brake ECU, perform initialization of linear solenoid valve and calibration.
1.REPLACE BRAKE ECU
Replace the brake ECU.
- INSPECTION END




Special Repair Requirement
1.ZERO ADJUSTMENT FOR EACH SENSOR AND OFFSET LEANING FOR LINEAR SOLENOID VALVE
After erasing brake ECU memories, perform zero adjustment of following sensors and initialization of linear solenoid valve.
- Steering angle sensor: Description.
- Yaw rate/side/decel G sensor: .
- Brake stroke sensor: Description.
- Linear solenoid valve: Description.
- END