Removal And Installation

CENTER CONSOLE ASSEMBLY


Removal and Installation


REMOVAL

CAUTION:
Whenever a suitable tool is used, always wrap a cloth around the end of the tool to protect components from damage.
1. Remove the CVT finisher. CVT Finisher.





2. Using a suitable tool, release the pawls, then remove cluster lid
D (1).





3. Using a suitable tool, release the clips, then remove the finisher/storage bin (1).
4. Remove the instrument lower panel LH. Instrument Lower Panel LH.
5. Remove the console side finishers (RH/LH).





6. Remove the console upper screws (A).





7. Remove the console side screws (A).
8. Position the front seats (RH/LH) forward.





9. Remove the console rear screw covers (RH/LH).
10. Remove the console rear screw (A) from each side (RH/LH), then remove the console assembly.

INSTALLATION
Installation is in the reverse order of removal.