CONSULT-III Function

DIAGNOSIS SYSTEM (AUTO AMP.)


CONSULT-III Function


FUNCTION






WORK SUPPORT MODE












NOTE:
When low voltage battery cable is disconnected or battery voltage is below 10 V, trimmer operation is canceled. Work items becomes that of initial setting.

SELF-DIAGNOSTIC RESULT
Testing and Inspection.

DATA MONITOR






ACTIVE TEST




















Refer to the following chart and check discharge air flow, air temperature, blower motor duty ratio, compressor operation, heater pump operation and engine operation.

CAUTION:
Complete this inspection within 10 seconds if there is no water in the heater pump.





Checks must be made visually, by listening the sound, or by touching air outlets with hand, etc. for improper operation.