Removal And Installation

HV RELAY ASSEMBLY


Removal and Installation


REMOVAL
1. Place ignition switch to OFF position.
2. Remove service plug. System Description.
3. Disconnect the 12 volt battery negative terminal and wait 10 minutes.
4. Remove the audio amp and bracket. Removal And Installation Bose Audio Without Navigation.
5. Remove the battery cooling duct.
6. Remove the side cover and LH cover from the HV battery assembly.
7. Remove the filter noise capacitor.





8. Disconnect ground wire (1), and the connectors from the HV relay assembly.
9. Remove the bolts and the HV relay assembly from the HV battery assembly.

INSTALLATION
Installation is in the reverse order of removal.





- When installing the LH cover, tighten the nuts to the specified torque in the order shown.





- Arrow Indicates Front