A/T Shift Selector Disassembly And Assembly

SHIFT CONTROL SYSTEM


A/T Shift Selector Disassembly and Assembly


DISASSEMBLY

NOTE:
A/T Shift Selector Removal And Installation to disassemble.
1. Remove shift selector handle from A/T shift selector assembly. Shift Selector Handle Removal And Installation.





2. Remove position lamp from position indicator plate (1).
3. Insert a suitable tool to (A) (at 4 locations) as shown, and bend each hook slightly to raise position indicator plate (1) and remove from A/T shift selector assembly (2).
4. Remove bracket from A/T shift selector assembly (2).
5. Remove A/T shift selector harness connector from A/T shift selector assembly (2).





6. Release tabs (A) on shift lock solenoid and park position switch assembly from hooks (B) on A/T shift selector assembly to shift lock solenoid and park position switch assembly.

ASSEMBLY
Assemble in the reverse order of disassembly.