RE0F08B

SHIFT CONTROL SYSTEM


CVT Shift Selector Disassembly and Assembly


DISASSEMBLY

NOTE:
Removal And Installation to disassemble.
1. Remove shift selector handle from CVT shift selector assembly. Shift Selector Handle Removal And Installation.





2. Remove position lamp from position indicator plate (1).
3. Insert a suitable tool to (A) (at 4 locations) as shown, and bend each hook slightly to raise position indicator plate (1) and remove from CVT shift selector assembly (2).
4. Remove bracket from CVT shift selector assembly (2).
5. Remove CVT shift selector harness connector from CVT shift selector assembly (2).





6. Release tabs (A) on shift lock solenoid and park position switch assembly from hooks (B) on CVT shift selector assembly to shift lock solenoid and park position switch assembly.

ASSEMBLY
Assembly is in the reverse order of disassembly.