Body Control Module: Service and Repair

BCM (BODY CONTROL MODULE)


Removal and Installation of BCM


REMOVAL

CAUTION:
Before replacing BCM, perform "READ CONFIGURATION" to save or print current vehicle specification. Programming and Relearning.
1. Disconnect the battery negative terminal.
2. Remove the glove box. Removal And Installation.





3. Remove the BCM screws, disconnect the connectors and remove the BCM (1).

INSTALLATION
Installation is in the reverse order of removal.

CAUTION:
- When replacing BCM, perform "WRITE CONFIGURATION". Programming and Relearning.
- When replacing BCM, perform the system initialization (NATS). Refer to the CONSULT-III operation manual for the initialization procedure.
- When replacing BCM, if new BCM does not come with key fobs attached, all existing key fobs must be re-registered. Refer to the CONSULT-III operation manual for the initialization procedure.