Removal And Installation

FENDER PROTECTOR

FENDER PROTECTOR : Removal and Installation


REMOVAL

1.Remove front road wheel.
2.Remove splash guard.





3.Remove fender protectors (rear side) fixing screws (A) and bolt (B).
4.Remove fender protector (rear) fixing clips, and then remove fender protector (rear).
5.Remove air guide.





6.Remove fender protector (front) fixing bolts (A).
7.Remove fender protector (front) fixing clips, and then remove fender protector (front).
8.Remove the following parts after removing fender protector.
- Fender clips
- J-nut

INSTALLATION

Install in the reverse order of removal.