Coupe

BODY SIDE TRIM

FRONT PILLAR GARNISH : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.

REMOVAL

1.Release front pillar portion of body side welt.
2.Disengage front pillar garnish fixing clip and metal clip with remover tool (A), cut clip (2) with cutter knife, and then remove front pillar garnish (1).






Broken circle indicates : Clip
Broken square indicates : Metal clip


INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
Check that clip and metal clip are securely fitted in panel holes on body when installing, and then press them in.