Roadster

BODY SIDE TRIM

FRONT PILLAR GARNISH : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.

REMOVAL

1.Release front pillar portion of body side welt.





2.Disengage front pillar garnish fixing metal clips with remover tool, and then pull up front pillar garnish to remove the pawls.

Broken triangle indicates : Pawl
Broken square indicates : Metal clip


INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
When installing, check that all pawls and metal clips are securely fitted in panel holes on body, and then press them in.