Convertible Top Latch: Adjustments

SOFT TOP

1ST BOW LATCH : Inspection and Adjustment


Inspection and Adjustment

1.Open soft top, and then apply red lead or dye penetrant testing agent to 1st bow latch hook [engagement with striker (both for LH and RH)].
2.Fully open soft top, and then engage 1st bow latch.





3.Open soft top, and then check that the red lead or dye penetrant testing agent peeled off from the 1st bow latch exceeds





4.If not exceeded, adjust hook contact length of 1st bow latch hook (LH and RH), and then adjust the push rod length by loosening nut (A), removing clip (1), and turning stud ball cap (2).

CAUTION:
- Adjust front lock rod LH and front lock rod RH simultaneously.
- Check that dimension between hook RH and hook LH is within the standard.

White arrow indicates : Vehicle front


CAUTION:
If 1st bow latch hook (center) does not exceed