Correspondence In Emergency
SYSTEM
SOFT TOP SYSTEM : Correspondence in Emergency
If the soft top cannot be operated electrically because of a discharged battery or any other system malfunction, the soft top needs to be closed manually or opened manually according to the following procedures.
MANUAL OPERATION (SOFT TOP FULLY OPEN ==> FULLY CLOSE)
1.Open Trunk Lid.
2.Open storage lid
- Remove trunk finisher front (2) inside of trunk by removing clips (1).
- Pull emergency cable (right and left) (3). Close trunk lid.
- Manually open storage lid from left and right side of the vehicle.
CAUTION:
Use a cloth or other tool to protect your hands when pulling on the lock release.
CAUTION:
- This is a heavy component. 2 workers are required.
- Fully close trunk lid before opening storage lid. Otherwise, storage lid may contact with trunk lid.
3.Close soft top.
- Pull up and close soft top from right and left side of the vehicle.
- Close top storage lid. Close the front and rear parts of soft top.
CAUTION:
Fully close storage lid. Otherwise, storage lid may contact with soft top.
4.Lock the 1st Bow of soft top.
- Remove cap (1).
- Insert a hexagonal wrench (2) into the hole and turn clockwise.
CAUTION:
Be careful not to leave the vehicle outside for a long period of time or drive at high speeds.
The soft top is not locked completely, and this may allow wind, rain and foreign matter to get into the vehicle.
MANUAL OPERATION (SOFT TOP FULLY CLOSE ==> FULLY OPEN)
1.Unlock the 1st Bow of soft top.
- Remove cap (1).
- Insert a hexagonal wrench (2) into the hole and turn counterclockwise.
2.Remove rear lock striker.
- Remove storage lid deflector. Refer toStorage Lid Deflector.
- Lift up soft top cover inner (1) from passenger room and remove soft top cover inner clips (2).
- Remove rear lock striker mounting bolts (3) from the service hole.
CAUTION:
Be careful not to damage storage lid during the operation.
3.Open 1st bow and 5th bow.
- Simultaneously lift up 1st bow and 5th bow. Fold soft top.
4.Open Trunk Lid.
5.Open storage lid.
- Remove trunk finisher front (2) inside of trunk by removing clips (1).
- Pull emergency cables (right and left) (3). Close trunk lid.
- Manually open storage lid from left and right side of the vehicle.
- Place soft top in storage lid.
CAUTION:
- Use a cloth or other tool to protect your hands when pulling on the lock release.
- This is a heavy component. 2 workers are required.
- Fully close trunk lid before opening storage lid. Otherwise, storage lid may contact with trunk lid.
6.Release 5th bow holder. Remove rear lock striker.
- Remove storage bracket assembly (2) from storage lid (1).
- Remove hydraulic cylinder (1).
- Rotate hydraulic cylinder mounting pivot (1). Release 5th bow.
Remove the striker.