Water Leakage Test

WATER LEAKAGE TROUBLE DIAGNOSIS

Water Leakage Test

Visually check for water leakage after repairing.
1.2 workers are required. One worker checks inside the vehicle, and the other one washes with water.





2.Use 13 mm (0.51 in) diameter hose. Adjust water pressure by following method. Hold the hose horizontally, and release water at 1000 mm (39.37 in) height from ground. Adjust the distance, between the ground point just below the hose and the water dropping point, to reach 700 mm (27.56 in). (See the figure.)
3.Keeping the distance between the hose and the testing area by
100 mm (3.94 in), apply water along the area 3 times. During applying water, move the hose by 100 mm (3.94 in)/sec speed.
4.Visually check for water leakage.