Without 7 Inch Display

DIAGNOSIS SYSTEM (HVAC)

CONSULT Function

CONSULT performs the following functions via CAN communication with A/C auto amp.





NOTE:
Diagnosis should be performed with the engine running. Door motor operation speeds become slower and NO
results may be returned even for normal operation if battery voltage drops below 12 V during self-diagnosis.

SELF-DIAGNOSIS RESULTS

Testing and Inspection.

DATA MONITOR

Display item list






ACTIVE TEST






Check each output device





NOTE:
- Perform the inspection of each output device after starting the engine because the compressor is operated.
- If the Mode 7 is selected, the malfunction is displayed but it is normal.

WORK SUPPORT






NOTE:
When the battery cable is disconnected from the negative terminal or when the battery voltage becomes 10 V
or less, the setting of WORK SUPPORT may be cancelled.