Removal And Installation

AV CONTROL UNIT

Removal and Installation


REMOVAL


CAUTION:
- Before replacing AV control unit, perform "READ CONFIGURATION" to save or print current vehicle specification. For details, Description.
- Remove battery terminal and AV control unit after a lapse of 30 seconds or more after turning the ignition switch OFF.
NOTE:
After the ignition switch is turned OFF, the AV control unit continues operating for approximately 30 seconds.
Therefore, data corruption may occur if battery voltage is cut off within 30 seconds.
1.Remove preset switch. Exploded View
2.Remove AV control unit with A/C auto amp. as a single unit from the body.
3.Remove bracket screws, and then remove AV control unit.

INSTALLATION

Install in the reverse order of removal.

CAUTION:
- Since AV control unit connector and unified meter and A/C amp. connector have the same form, be careful not to insert them wrongly.
- Be sure to perform "WRITE CONFIGURATION" when replacing AV control unit.