Shift Position Indicator

SHIFT POSITION INDICATOR

Description

The shift lever position is indicated by shift position indicator on combination meter. ECM receives gear position signal from gear lever position sensor and transmits the signal to combination meter via CAN communication.


Component Function Check


1. CHECK SHIFT POSITION INDICATOR

1.Turn ignition switch ON.
2.Check that shift position indicator turns ON.
Is the inspection result normal?
YES- INSPECTION END
NO- Go to .


Diagnosis Procedure


1. CHECK DTC

Check that DTC UXXXX is not displayed.
Is the inspection result normal?
YES- GO TO 2.
NO- Perform trouble diagnosis for DTC UXXXX.

2. CHECK DTC WITH "COMBINATION METER"

Meter.
Is the inspection result normal?
YES- GO TO 3.
NO- Perform trouble diagnosis relevant to DTC indicated.

3. CHECK INTERMITTENT INCIDENT

Intermittent Incident Regular Grade.
Is the inspection result normal?
YES- Replace combination meter.
NO- Repair or replace.