Rear Door Window Glass: Service and Repair
DOOR GLASS
Removal and Installation
REMOVAL
1.Remove the door finisher. Coupe model : Coupe.Roadster model :
Roadster.
2.Disconnect the door speaker harness connector.
3.Operate the power window main switch to raise or lower the door window until the glass mounting bolts can be seen.
4.Remove the glass mounting bolts (A) and loosen slightly the bolt (B).
5.Hold securely the door glass and pull it out of the sash to remove the door glass.
NOTE:
Never raise the glass at the top upper of the door after the door glass is removed.
6.Remove the corner piece assembly mounting bolts and nut, and then remove the corner piece assembly.
INSTALLATION
Install in the reverse order of removal.