"LOCK" Warning Lamp (With M/T) Check

INTELLIGENT KEY SYSTEM

"LOCK" Warning Lamp (With M/T) Check


1. CHECK WARNING LAMP OPERATION

With CONSULT
- Check "INDICATOR" in "ACTIVE TEST" mode with CONSULT.
- Select "KNOB ON".
"LOCK" warning lamp should illuminate.
Without CONSULT
1.Turn ignition switch OFF.
2.While monitoring the combination meter warning lamps, turn ignition switch ON. "LOCK" warning lamp should illuminate for 1
second to perform a bulb check.





OK or NG
OK- Inspection End.
NG- Check combination meter.