Alternator: Service and Repair
CHARGING SYSTEM
Removal and Installation
REMOVAL
1.Disconnect the battery negative terminal. Removal and Replacement.
2.Remove drive belt. Removal And Installation.
3.Remove radiator reservoir tank. Removal and Installation.
4.Disconnect generator connector.
5.Remove "B" terminal nut.
6.Remove generator bolts.
7.Remove generator assembly from the vehicle.
GENERATOR PULLEY INSPECTION
- Check that the generator pulley does not rattle.
- Check that the generator pulley nut is properly tightened.
Generator pulley nut: 118 Nm (12.0 kg-m, 87 ft-lb)
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Be sure to tighten "B" terminal nut carefully.