Trunk / Liftgate Striker: Service and Repair

TRUNK LID

TRUNK LID STRIKER : Removal and Installation


REMOVAL

1.Remove trunk rear plate. .





2.Remove trunk lid opener cable bolt (A) and trunk lid striker bolts (B).





3.Pull out trunk lid striker (1), disconnect trunk lid opener cable (2)
from trunk lid striker and then remove trunk lid striker.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Check trunk lid open/close, lock/unlock operation after installation.
- When removing and installing trunk lid striker, perform the trunk lid adjustment procedure. Refer to
Adjustments.