Removal And Installation

CENTER CONSOLE ASSEMBLY

Removal and Installation


REMOVAL

1.Move shift selector to "N" position (CVT models).
2.Remove shift selector handle and console boot (M/T models).
3.Raise parking brake lever.
4.Remove center console assembly clips (A).





5.Remove the center console assembly rear screws.
6.Slide front seat RH all the way backward and place in fully reclined position.
7.Slide front seat LH all the way forward and tilt seatback to the full forward position.





8.Raise rear right corner of center console assembly, rotating slightly, making sure to lift assembly upward over the parking brake handle.
9.Disconnect power socket connector and USB/auxiliary jack connector (if equipped) and remove center console assembly.

INSTALLATION

Installation is in the reverse order of removal.