Front Pillar Finisher

BODY SIDE TRIM

FRONT PILLAR FINISHER : Removal and Installation


REMOVAL

1.Release front pillar portion of front body side welt.





2.Pull front pillar finisher downward as shown, using mild pressure to disengage the front pillar finisher from the clips.

Broken triangle indicates : Clip





3.Remove the front pillar finisher clips (B) using a suitable tool (A).

INSTALLATION






1.Install the front pillar finisher clips (A) to the front pillar finisher by inserting clip end and rotating 90 degrees in either direction.
2.Install the front pillar finisher to the front pillar.

CAUTION:
When installing front pillar finisher, check that all clips are securely pressed into body panel holes.