Kicking Plate Inner

BODY SIDE TRIM

KICKING PLATE INNER : Removal and Installation


FRONT KICKING PLATE

Removal





1.Disengage front kicking plate pawls using a suitable tool (A) and remove front kicking plate as shown.

CAUTION:
Apply protective tape (B) to the body as shown before releasing the pawls on the outer ends.





Installation
Installation is in the reverse order of removal.

REAR KICKING PLATE

Removal
1.Remove rear seat cushion. Removal And Installation.





2.Remove rear kicking plate clip (A).





3.Lift rear end of rear kicking plate to disengage rear kicking plate metal clips, then rotate front end of rear kicking plate to disengage rear kicking plate pawls and remove rear kicking plate.





Installation
Installation is in the reverse order of removal.

CAUTION:
When installing rear kicking plate, make sure that metal clips are securely pressed in body panel holes.