Removal and Installation

FRONT SEAT

Removal and Installation


REMOVAL

1.Remove headrest.
2.Set the seatback vertically.
3.Slide seat to the frontmost position.
4.Remove rear outer bolt.
5.Remove rear inner bolt.
6.Slide seat to the rearmost position.
7.Remove front outer bolt.
8.Remove front inner bolt.
9.Remove seat cushion lower harness connectors and harness clamps.

CAUTION:
Before performing removal operation, check the installation position of harness connectors and harness clamps.
10.Remove seat from the vehicle.

CAUTION:
When removing and installing, use shop cloths to protect parts from damage.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- When removing and installing, use shop cloths to protect parts from damage.





- During installation, tighten bolts according to the numerical order as shown, starting from front inner bolt.
For the specified torque, Exploded View.