Manual Air Conditioning
DIAGNOSIS AND REPAIR WORK FLOW
Work flow
OVERALL SEQUENCE
DETAILED FLOW
1. INTERVIEW CUSTOMER
Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.
- GO TO 2.
2. SYMPTOM CHECK
Verify symptoms.
- GO TO 3.
3. CHECK FOR DTCS
With CONSULT
1.Turn ignition switch ON.
2.Select "Self Diagnostic Result" mode of "BCM" using CONSULT.
3.Check DTC.
Is any DTC detected?
YES- GO TO 4.
NO- GO TO 5.
4. PERFORM DTC DIAGNOSTIC PROCEDURE
Perform the diagnostic procedure for the detected DTC. BCM.
- GO TO 7.
5. OPERATION CHECK
Perform the operation check. Operation Inspection.
- GO TO 6.
6. SYMPTOM DIAGNOSIS
Check the symptom diagnosis table. Symptom Table.
- GO TO 8.
7. VERIFY REPAIR.
With CONSULT
1.Turn ignition switch ON.
2.Select "Self Diagnostic Result" mode of "BCM" using CONSULT.
3.Check DTC.
Is any DTC detected?
YES- GO TO 4.
NO- GO TO 8.
8. PERFORM FINAL OPERATION CHECK
Perform the operation check. Operation Inspection.
Does it operate normally?
YES- Inspection End.
NO- GO TO 2.