Removal And Installation

STARTER MOTOR

Removal and Installation


REMOVAL

1.Disconnect the battery cable from the negative terminal.
2.Remove air duct (inlet). Removal And Installation.
3.Remove "S" terminal nut and "S" terminal harness.
4.Remove "B" terminal nut and "B" terminal harness.
5.Remove oil filter. Removal And Installation.
6.Remove starter motor bolts.





7.Remove starter motor from underneath the vehicle.






CAUTION:
Be careful to not damage surrounding parts when removing starter motor from the vehicle.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Be careful to tighten starter bolts, "S" terminal nut and "B" terminal nut to the specified torque.
- Install oil filter. Removal And Installation.
- Clean battery terminals and battery cables to remove corrosion prior to connecting.
- Ensure the battery cables are tightened to the specified torque.
NOTE:
Reset electronic systems as necessary.