Disassembly And Assembly

CVT SHIFT SELECTOR

Disassembly and Assembly


DISASSEMBLY






1.Slide the shift selector handle cover (1) down.

CAUTION:
Do not damage the shift selector handle cover.
2.Pull out the lock pin (2).
3.Pull the shift selector handle (3) and shift selector handle cover upward to remove.
4.Remove the position lamp.





5.Disengage the hooks (A) (4 locations), and lift up the position indication panel (1) to separate it from the CVT shift selector assembly (2).

CAUTION:
Do not damage the CVT shift selector assembly.

ASSEMBLY

Assembly is in the reverse order of disassembly.
- Follow the procedure below to install the shift selector handle.





1.Install the lock pin (2) onto the shift selector handle (3).
2.Install the shift selector handle cover (1) onto the shift selector handle.
3.Press the shift selector handle onto the shift selector until it clicks.

CAUTION:
- When pressing the shift selector handle onto the shift selector, do not press the shift selector handle button.
- Do not strike the shift selector handle to install it.