OD Off Indicator Lamp

OD OFF INDICATOR LAMP

Component Function Check


1. CHECK OD OFF INDICATOR LAMP FUNCTION

Check OD OFF indicator lamp turns ON for approx. 2 seconds when ignition switch turns ON.
Is the inspection results normal?
YES- INSPECTION END
NO- Go to .


Diagnosis Procedure


1. CHECK DTC (TCM)

With CONSULT
1.Turn ignition switch ON.
2.Check "Self Diagnostic Results" in "TRANSMISSION".
Is any DTC detected?
YES- Check DTC detected item. Testing and Inspection.
NO- GO TO 2.

2. CHECK DTC (COMBINATION METER)

With CONSULT
Check "Self Diagnostic Results" in "METER/M&A".
Is any DTC detected?
YES- Check DTC detected item. Testing and Inspection.
NO- GO TO 3.

3. CHECK COMBINATION METER INPUT SIGNAL

With CONSULT
1.Shift the selector lever to "D" position.
2.Select "Data Monitor" in "METER/M&A".
3.Select "O/D OFF IND".
4.Check that "O/D OFF IND" turns ON/OFF when overdrive control switch is operated. Type B.
Is the inspection result normal?
YES- Replace combination meter. Type B.
NO- GO TO 4.

4. CHECK TCM INPUT/OUTPUT SIGNAL

With CONSULT
1.Select "Data Monitor" in "TRANSMISSION".
2.Select "SPORT MODE SW".
3.Check that "SPORT MODE SW" turns ON/OFF when overdrive control switch is operated. Pinout Values and Diagnostic Parameters.
Is the inspection result normal?
YES- Replace combination meter. Type B.
NO- Check overdrive control switch. Overdrive Control Switch.