Center Pillar Lower Finisher

BODY SIDE TRIM

CENTER PILLAR LOWER FINISHER : Removal and Installation


REMOVAL

1.Move the front seat to the full forward position.
2.Remove the front kicking plate inner. Refer to "FRONT KICKING PLATE : Removal and Installation Inner" Removal And Installation - Inner.
3.Remove the rear kicking plate inner. Refer to "REAR KICKING PLATE : Removal and Installation Inner" Removal And Installation - Inner.
4.Partially remove the front body side welt. Refer to "BODY SIDE WELT : Removal and Installation Front Body Side Welt" Removal And Installation - Front Body Side Welt.
5.Partially remove the rear body side welt. Refer to "BODY SIDE WELT : Removal and Installation Rear Body Side Welt" Removal And Installation - Rear Body Side Welt.





6.Release the center pillar lower finisher clips.
Broken triangle indicates : Clip

7.Remove the seat belt from the center pillar lower finisher, then remove the center pillar lower finisher.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Visually check the clips for deformation and damage during installation. Replace with new ones if necessary.
- When installing the center pillar lower finisher, check that the clips are securely placed in the body panel holes.