Dash Side Finisher

BODY SIDE TRIM

DASH SIDE FINISHER : Removal and Installation


REMOVAL

1.Remove front kicking plate inner. Refer to "FRONT KICKING PLATE : Removal and Installation Inner" Removal And Installation - Inner.





2.Release the metal clip and pawl using a suitable tool, then remove dash side finisher.
Broken square indicates : Metal clip
Broken circle indicates : Pawl

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Visually check the metal clip and pawl for deformation and damage during installation. Replace as necessary.
- When installing the dash side finisher, check that the metal clip and pawl are securely placed in the body panel holes.