Rear Pillar Finisher

BODY SIDE TRIM

REAR PILLAR FINISHER : Removal and Installation


REMOVAL

1.Remove the rear seat bolster. Refer to "Removal and Installation Rear Seat Bolster" Rear Seat Bolster.
2.Partially remove the rear body side welt. Refer to "BODY SIDE WELT : Removal and Installation Rear Body Side Welt" Removal And Installation - Rear Body Side Welt.





3.Release the rear pillar finisher clips and pawls and push pin (A).
Broken triangle indicates : Clip
Broken square indicates : Metal clip
Broken circle indicates : Pawl

4.Remove the rear pillar finisher.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:
- Visually check the clips, metal clips and pawls for deformation and damage during installation.
Replace with new ones if necessary.
- When installing the rear pillar finisher, check that the clips, metal clips, push pin and pawls are securely fitted in the body panel holes.