Seat Assembly

REAR SEAT

Removal and Installation - Seat Assembly


REMOVAL

NOTE:
Rear seatback assembly RH must be removed first, then rear seatback assembly LH can be removed.
1.Remove the rear seat cushion assembly. Refer to "Removal and Installation Seat Cushion Assembly" Seat Cushion Assembly.
2.Remove the rear seat bolster RH. Refer to "Removal and Installation Rear Seat Bolster" Rear Seat Bolster.





3.Remove the rear seatback assembly RH (1).
a.Remove the seatback pivot bolt (A).

CAUTION:
Do not remove hinge bolt (B) or seatback alignment may be necessary.
b.Release the seatback latch assembly then remove the rear seatback assembly (1) from the seatback hinge assembly RH
(2).
c.Remove the rear seatback assembly RH.
4.Remove the rear seat bolster LH. Refer to "Removal and Installation Rear Seat Bolster" Rear Seat Bolster.
5.Remove the rear seatback assembly LH (1).
a.Remove retaining clip (A) from seatback pivot pin (B) using a suitable tool.





(2) Seatback hinge assembly RH
NOTE:
Retaining clip (A) is used for factory installation only, it is not a serviceable part and not necessary to use during installation.





b.Remove the seatback pivot bolt (A).

CAUTION:
Do not remove hinge bolt (B) or seatback alignment may be necessary.
c.Release the seatback latch assembly then remove the rear seatback assembly (1) from the seatback hinge LH (2).
d.Remove the rear seatback assembly LH.

INSTALLATION

Installation is in the reverse order of removal.
- Tighten bolts and nuts to specification. Refer to "Exploded View" Exploded View.