Evaporator Core: Service and Repair

HEATING AND COOLING UNIT ASSEMBLY

EVAPORATOR : Removal and Installation


REMOVAL

1.Remove the heater core. Refer to "HEATER CORE : Removal and Installation" Service and Repair.
2.Remove the upper floor connecting duct RH. Refer to "Exploded View" Exploded View.
3.Remove the air mix door motor (driver). Refer to "AIR MIX DOOR MOTOR : Removal and Installation Air Mix Door Motor RH" Removal And Installation - Air Mix Door Motor RH.
4.Remove the air mix door motor (passenger) (if equipped). Refer to "AIR MIX DOOR MOTOR : Removal and Installation Air Mix Door Motor LH" Removal And Installation - Air Mix Door Motor LH
5.Remove the evaporator and expansion valve assembly.

INSTALLATION

Installation is in the reverse order of removal.
NOTE:
The evaporator can only be ordered as an assembly with the expansion valve.