Removal And Installation
BATTERY
Removal and Installation (Battery)
REMOVAL
1.Remove cover of battery positive terminal.
2.Loosen battery terminal nuts and disconnect both positive and negative battery terminals.
CAUTION:
Disconnect the negative battery terminal first.
3.Remove battery frame nuts, battery frame and battery rods.
4.Remove battery cover.
5.Remove battery.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Connect the positive battery terminal first.
Battery terminal nut: 5.4 Nm (0.55 kg-m, 48 in-lb)
Reset electronic systems as necessary. Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement" Programming and Relearning.