Component Inspection

WASHER SWITCH

Component Inspection

Regarding Wiring Diagram information, refer to {LINK_TO:0000000007986997}, "Wiring Diagram - With Rear View Camera Washer
Control System".

1. CHECK WASHER SWITCH

1.Turn the ignition switch OFF.
2.Disconnect combination switch (wiper and washer switch) connector M28.
3.Check continuity between the combination switch (wiper and washer switch) terminals.










Does continuity exist?
YES- Washer switch is normal.
NO- Replace combination switch (wiper and washer switch). Refer to "Removal and Installation" Service and Repair.