Removal And Installation

FRONT WIPER DRIVE ASSEMBLY

Removal and Installation


REMOVAL

1.Remove the cowl top. Refer to "Removal and Installation" Removal And Installation.
2.Remove the strut tower bar. Refer to "Exploded View" Exploded View.
3.Disconnect the harness connector from the wiper drive assembly.
4.Remove the wiper drive assembly bolts.
5.Remove the wiper drive assembly.

INSTALLATION

1.Install the wiper drive assembly.
2.Install the wiper drive assembly bolts.
3.Connect the harness connector to the wiper drive assembly.
4.Install the strut tower bar. Refer to "Exploded View" Exploded View.
5.Install the cowl top. Refer to "Removal and Installation" Removal And Installation.
6.Check that the wiper blades stop at the specified position. Refer to "WIPER BLADE : Adjustment" Adjustment.